Current sample size is 15mm x 15mm x 7 mm, resolution of images are around 13 microns\pixel. Largest observed crack width is roughly 80 microns.
Showing posts with label RILEM. Show all posts
Showing posts with label RILEM. Show all posts
Friday, 5 April 2013
CT-Scan of ASR reacted samples
Today I have been busy with a trial CT-scan of RILEM AAR-4 samples. The Main aim was to get a 3-dimensional view on how cracks were distributed in concrete medium. Following 3 videos show Top, Front and side view respectively. While progressing through the sample, we can see how cracks are located and progressed.
Current sample size is 15mm x 15mm x 7 mm, resolution of images are around 13 microns\pixel. Largest observed crack width is roughly 80 microns.
Current sample size is 15mm x 15mm x 7 mm, resolution of images are around 13 microns\pixel. Largest observed crack width is roughly 80 microns.
Wednesday, 5 December 2012
Nano indentation
Recently I have been working on ways to identify material properties of phases in my concrete samples. As of yesterday we started with our first Nano indentation test. The main aim of this study will be to identify dissolved properties of aggregate and paste in the matrix with known exposure to Accelerated test conditions. Here is a short photo series of how we prepared samples for nano-indenter.
![]() |
| We cut sections from expansion prism (roughly 1.5 cm thick) |
![]() |
| Sections are organized named and further selections are marked |
![]() |
| Smaller Specimens are prepared to fit the sample holder for Nano Indentation |
Friday, 24 August 2012
SIMULATION: Crack formation under Aggregate Expansion
We have been trying to run simulations on various loading conditions and material properties to investigate crack formation in 2D sections. While we are busy with sample analyses and running simulations, here is a taster (if you may call it a result) video of how cracks grow under expanding aggregates. This simulation is based on a real test specimen (Upside down though).
Simulations continue till the specimen fails (or reaches a predefined stain level). You may realise some simplification on the section identification. Here are how the original sections look like. These specimens have been kept in 60°C reactor (RH 100%) for 20 weeks before sample preparation process.
Specimens are based on original mix design of Nautesund Bridge. you can find more information about this testing campaign here.
I have also done damage rating index analyses on this (and various other) specimens based on method defined by Grattan-bellew (1992). Some results regarding These analysis are as follows:
Damage rating index - calculated based on Grattan Bellew (1992)
Distribution of Crack types observed on our samples
DRI analyses and simulations are continuing in full speed. Soon I will provide more data (and definitely more results) on our blog.
Busy months ahead..
Wednesday, 22 August 2012
PAT-ASR team in ICCRRR, Cape Town
It is almost time for yet another big conference on concrete research. We are participating in 3rd International Conference on Concrete Repair Rehabilitation and Retrofitting in Cape Town, South Africa. We are presenting two papers in this conference. It will exciting to meet and interact with colleagues around the world.
It's a long flight with an exciting ending. Looking forward to it.
It's a long flight with an exciting ending. Looking forward to it.
Friday, 2 March 2012
Performance Testing for AAR (Nautesund)
(A delayed post)
After busy preparation period in November, it's been a productive December for experiments. Reassuring way to end year 2011. Experimental part of our project is divided into several workpackages consisting of RILEM AAR-3 (38°C) and AAR-4 (60°C) performance tests.
One of which is backward compatibility tests. By the courtesy of Norwegian Public Roads Department, we have accessed materials from Nautesund bridge.

As mentioned earlier, we have received several cores from Norway.
After analysis on the samples, original mix has been identified. In December we cast 4 mixes (3 of which with original mix design -with varied w/c ratios, and 1 standard RILEM recommended mix). Currently running performance tests on these specimens.
Preliminary results show that specimens reached RILEM limits within 5 weeks in to the experiment (espacially for 60°C test)
To understand the progress of gel and crack propagation within sample we have adopted extra specimens sizes of 10x10x10 cm.These samples will be used for thin and polished section analyses. Data collection schedule for a standard concrete performance testing is as follows:
For performance and parameter testing more castings are schedules for March 2012.
... more results and detailed analysis to follow, soon.
After busy preparation period in November, it's been a productive December for experiments. Reassuring way to end year 2011. Experimental part of our project is divided into several workpackages consisting of RILEM AAR-3 (38°C) and AAR-4 (60°C) performance tests.
One of which is backward compatibility tests. By the courtesy of Norwegian Public Roads Department, we have accessed materials from Nautesund bridge.

As mentioned earlier, we have received several cores from Norway.
After analysis on the samples, original mix has been identified. In December we cast 4 mixes (3 of which with original mix design -with varied w/c ratios, and 1 standard RILEM recommended mix). Currently running performance tests on these specimens.
Preliminary results show that specimens reached RILEM limits within 5 weeks in to the experiment (espacially for 60°C test)
![]() |
| AAR-4 (60°C Expansion values as of 01/03/2012) |
![]() |
| Data collection scheme for RILEM recommended testing |
![]() |
| Specimen quantities and dimensions |
For performance and parameter testing more castings are schedules for March 2012.
... more results and detailed analysis to follow, soon.
Friday, 21 October 2011
Very Preliminary test results
In TUD laboratories,
we are executing accelerated performance tests –which are defined by AAR study groups of RILEM committee-. Results from these
tests and analyses on the samples will be used for backward compatibility
checks with cores/information from existing affected structures and ongoing
studies on parameter characterisation in literature.
Later batch of mixes will be aiming to get the same mix as Nautesund Birdge in Oslo, Norway. This bridge was built in 1958 and demolished in 2009. ASR has been diagnosed as a part of degradation, and overall assessment of the bridge, thus final demolition decision.
Pictures from the construction of Nautesund Bridge - courtesy of Ingvar Hellestad, (special thanks to Per Hagelia).
Currently validations test with 4 mixes, based on Norwegian Reference concrete are running for RILEM AAR-3 @ 38° C and AAR-4 @ 60° C tests. Current mixes involve Aggregates : Ardal, Spratt and Ottersbo and cements from NORCEM Cement CEMI : Industri and Anlegg. These results will be used for the confirmation of TUD Labs testing performance. Very preliminary expansion results to follow (as of 21st Oct, 2011):

Pictures from the construction of Nautesund Bridge - courtesy of Ingvar Hellestad, (special thanks to Per Hagelia).
Polished section from 7 original cores are under preparation process. We are hoping to get comparable results early 2012.
Currently validations test with 4 mixes, based on Norwegian Reference concrete are running for RILEM AAR-3 @ 38° C and AAR-4 @ 60° C tests. Current mixes involve Aggregates : Ardal, Spratt and Ottersbo and cements from NORCEM Cement CEMI : Industri and Anlegg. These results will be used for the confirmation of TUD Labs testing performance. Very preliminary expansion results to follow (as of 21st Oct, 2011):
Subscribe to:
Posts (Atom)
















