Showing posts with label data. Show all posts
Showing posts with label data. Show all posts

Sunday, 18 November 2012

Timing of Damage - Cutoff level in simulation results

Lattice simulations are capable of simulating crack pattern due to various loading modes. Either Aggregate, ITZ or paste (open cracks). As simulations run till the system failure (or predeifned failure threshold strain) there is a challenge on deciding on the cut-off level of damage progress in 2D system. Thanks to help from my colleague Branko Savija, now we introduced a itterative way to calculate total crack opening on every step. This approach allows us to compare damaged images (with known duration, environmental conditions (accelerated test) mix properties and aggregate geometry distribution) with threshold cracks (based on pixel counts) with relative damage in the system of lattice beams. Total crack width calculations shall be smooted for outliers but comparison graphs look like tese:

Sample 1: Core from Nautesund Bridge S31-3
Simulations are based on loading modes; AGG, ITZ, AGG+ITZ, Paste (20% randomly distributed). Based on image analyses cut-off line is 6%
Sample 2: Cube from accelerated tests (60°C) duration 140 days - original mix design from Nautesund Bridge (w/c=0.5) - No Alkali boosting (Expansion value: 0.24%)
Simulations are based on loading modes; AGG, ITZ, AGG+ITZ, Paste (20% randomly distributed). Based on image analyses cut-off line is 6%

Sample 3: Cube from standard accelerated tests (60°C) duration 140 days - original aggregates from Nautesund Bridge (w/c=0.5) - Based on standard grading curve - No alkali boosting. (Expansion value: 0.14%)
Simulations are based on loading modes; AGG, ITZ, AGG+ITZ, Paste (20% randomly distributed). Based on image analyses cut-off line is 10%

 This approach allows us indetify which loading modes progress faster. But there is still room for progress but initial results seems promising. Next step will be intentifying crack width growth by phase types and recalibration of material properties with Nanoindentation techniques.

A PhD's Data flow

Looks like a lot more to accomplish... That's phd-life..

Friday, 2 March 2012

Performance Testing for AAR (Nautesund)

(A delayed post)

After busy preparation period in November, it's been a productive December for experiments. Reassuring way to end year 2011. Experimental part of our project is divided into several workpackages consisting of RILEM AAR-3 (38°C) and AAR-4 (60°C) performance tests.

 

One of which is backward compatibility tests. By the courtesy of Norwegian Public Roads Department, we have accessed materials from Nautesund bridge.


As mentioned earlier, we have received several cores from Norway.
After analysis on the samples, original mix has been identified. In December we cast 4 mixes (3 of which with original mix design -with varied w/c ratios, and 1 standard RILEM recommended mix). Currently running performance tests on these specimens.

Preliminary results show that specimens reached RILEM limits within 5 weeks in to the experiment (espacially for 60°C test)





AAR-4 (60°C Expansion values as of 01/03/2012)
To understand the progress of gel and crack propagation within sample we have adopted extra specimens sizes of 10x10x10 cm.These samples will be used for thin and polished section analyses. Data collection schedule for a standard concrete performance testing is as follows:

Data collection scheme for RILEM recommended testing
Specimen quantities and dimensions


For performance and parameter testing more castings are schedules for March 2012.
... more results and detailed analysis to follow, soon.

Thursday, 27 October 2011

ASR Affected structures in Netherlands

In Netherlands, most highway structures are concrete structures. However alkali silica reaction is mostly overlooked until 1995. Mostly, due to wide usage of high slag content concrete. Netherlands was confronted with the first large scale ASR-damage in A59 highway where 20 bridges were identified to be affected. Today there ongoing studies on these bridges and several other structures. Lately, (unofficially) the first structure was demolished due to ASR. PAT-ASR team got involved with this structure and did some petrographic analysis on the cores extracted from A bridge in Schoonhoven (Zuid-Holland Province).

Recently, we got in touch with Zuid Holland Province administration, who are eager to carry out studies on several structures which are supposed to be ASR affected. You can find more info about this possibly affected/suspected structures under investigation (and also find a map for the locations of these structures).

View ASR in NL in a larger map

Ongoing studies on some of there structures will follow:  

Friday, 21 October 2011

Very Preliminary test results

In TUD laboratories, we are executing accelerated performance tests –which are defined by AAR study groups of RILEM committee-. Results from these tests and analyses on the samples will be used for backward compatibility checks with cores/information from existing affected structures and ongoing studies on parameter characterisation in literature. 

Later batch of mixes will be aiming to  get the same mix as Nautesund Birdge in Oslo, Norway. This bridge was built in 1958 and demolished in 2009. ASR has been diagnosed as a part of degradation, and overall assessment of the bridge, thus final demolition decision.



Pictures from the construction of Nautesund Bridge - courtesy of Ingvar Hellestad,  (special thanks to Per Hagelia).


Polished section from 7 original cores are under preparation process. We are hoping to get comparable results early 2012.

 

Currently validations test with 4 mixes, based on Norwegian Reference concrete are running for RILEM AAR-3 @ 38° C and AAR-4 @ 60° C tests. Current mixes involve Aggregates : Ardal, Spratt and Ottersbo and cements from NORCEM Cement CEMI : Industri and Anlegg. These results will be used for the confirmation of TUD Labs testing performance. Very preliminary expansion results to follow (as of 21st Oct, 2011):