Showing posts with label simulation. Show all posts
Showing posts with label simulation. Show all posts

Thursday, 14 March 2013

Happiest moment for the last 10 days

Since last week Monday, I have been busy with Triangulation of meshes in Lattice model. Thanks to help from Branko & Mladena, I have come long way. Trick is, you need to calibrate your mesh element radius to have a representable mesh (I know it sounds geek and boring- that's life of PhD). That requires running an Uni axial tensile test on your mesh and check whether calculated E modulus is same as your initial assumption. As all programming goes, have been struggling to pass 1st simulation step (so the solver writes the output file). Finally, after miserable frustrating days, program passed the first step and gave results. 

Now I need to calibrate 10 more meshes with various randomness.

A day in life of a PhD

Friday, 21 December 2012

A Work in progress - NanoIndentation

By the end of 2012, (and no Apocalyptic events so far) I am trying to put together results of first set of Nano indentation.
As mentioned earlier, 4 specimens from 60°C testing (3 from original mix design + 1 RILEM standard mix design) are used for analyses. Main problem following indentation process is matching mechanical properties to exact locations on specimens. So far success rate of indent attempts are a bit low (around 55-70%). This was mainly due to some last minute revisions on samples and disturbing the flatness of our samples. Yet there are enough data for our purpose. With our new sample holders I believe this rate will raise drastically.

For the last week or so, I have been working on a Matlab code which gathers thousands of indent data, crunches the numbers and groups curves in to several E Modulus values (with 30GPa intervals). I have been working on a standardised way to identify (hypothesise) a way to identify locations of indents. As they are not (or very hardly visible) through light microscope, we needed to randomly distribute a grid on indent area, then check whether it is statistically comparable with NanoIndenter results.

Here is how it works.

\begin{example}

We had original documentation of our samples where interested indent areas are marked.

Micrograph image under stereo microscopy MagX0.63 - Each grid represents 4mm­² area
After indentations is performed another micrograph is taken with a higher magnification (4X) for detailing indent area alone.
Micrograph image under stereo microscopy MagX4 - Each cross is placed 200microns from each other as indentation points were
It is hardly visible from this image but manual point counting is applied on this image where each 200 microns increment is marked digitally. Finally we end up with two images for matching and comparison purposes. First one representing hypothetical  distribution of indent points and their corresponding material phases. Second one a representation of how E-modulus values vary through indentation grid.
Point count results
Surface map diagram of Indent results for E (GPa) values
This methods allows a standard way to overlay test results with real material properties. This can be further investigated by correlating findings with following subgroups of indent results shown in subplots.


\end{example}

Next set of experiments will start in Jan 3rd 2013. Till then,

Merry Christmas and a happy New year to All.



Monday, 27 August 2012

More images on 3 different samples

Work in progress. Here is crack development for 3 different samples based on different loading conditions, various aggregate size and agg/paste ratio.

Currently working on quantification of damage obtained from simulations. Regarding our previous post these are attempts to understand the crack formation mechanism (and hopefully fitting on a timeline).

Friday, 24 August 2012

SIMULATION: Crack formation under Aggregate Expansion

We have been trying to run simulations on various loading conditions and material properties to investigate crack formation in 2D sections. While we are busy with sample analyses and running simulations, here is a taster (if you may call it a result) video of how cracks grow under expanding aggregates. This simulation is based on a real test specimen (Upside down though).


Simulations continue till the specimen fails (or reaches a predefined stain level). You may realise some simplification on the section identification. Here are how the original sections look like. These specimens have been kept in 60°C reactor (RH 100%) for 20 weeks before sample preparation process.

 1- Normal Light Image
2- UV Light Image

Specimens are based on original mix design of Nautesund Bridge. you can find more information about this testing campaign here.
I have also done damage rating index analyses on this (and various other) specimens based on method defined by Grattan-bellew (1992). Some results regarding These analysis are as follows:
 Damage rating index - calculated based on Grattan Bellew (1992)
Distribution of Crack types observed on our samples

DRI analyses and simulations are continuing in full speed. Soon I will provide more data (and definitely more results) on our blog.

Busy months ahead..



FRAMCOS - 8: Call for Papers

8th International Conference on Fracture Mechanics of Concrete and Concrete Structures will be held in Toledo Spain, March 2013. Deadline for Paper submission is 15 September, approaching.

Hopefully we will be there to present our findings.

Friday, 2 March 2012

First 2D simulations

Using digital imaging from reacted structure samples, we managed to run a 2D simulation for ASR expansion (size of 9.6 cm x 9.6 cm) .



Using thresholding and edge detection images are convereted to binary images. Three Phases (aggregate - mortar - ITZ) identified and superimposed with a lattice mesh including (79600 beam elements). Based on earlier studies (Schlangen and Copuroglu, 2010) material properties are assigned and expansion is defined on all interfacial transition zone (ITZ) elements.



Cracked beam elements after 3000-8000-20000 steps.

First attempts assumed local lodings on the ITZ elements only and swelling to start simultaneously. Currently we are working on identification reactive components in a 2D medium and implementing non-simultaneous expansion patterns in the section. After execution of small scale testing device we will have more insights about pressure progress and gel propeties (those details for another post). Alternate reactive regions and shifted timing regimes to be defined later on.

Deformed version of sample after 20000 steps

Still a lot to do, in modeling but first results seems promising for improvement.



Schlangen, E. and C. Copuroglu (2010). Modeling of expansion and cracking due to ASR with 3D lattice model. Framcos7, Jeju, Korea.